Modello Uno UT1
Toolwatch - Diver
520€
Tax & duties included
Made-in-Italy quartz dive watch
360° protection system, MIL-STD-810H certified*
UNIMATIC travel pouch & black two-piece quick-release nylon strap included
Ref. UWK-UT1
Add the Accessory No one Selected 0,00€ +4
Add to wishlist
Buy Now, Pay Later. 3 payments at 0% interest.
Estimated shipping within 2/4 business days.
You may return the product within 14 days.
24 months warranty.
Description Discover more
The Modello Uno Toolwatch UT1 is a Made-in-Italy quartz dive watch with a matte black countdown bezel insert, black dial with printed Arabic numerals, Super-LumiNova® C1 lume markers, white second rail, and international orange dial trims. Time is indicated with phantom ladder hands and a black reverse lollipop seconds hand with orange tip.
Protected by a flat anti-reflective sapphire crystal, the watch ensures optimal visibility in all lighting conditions. The sandblasted 316L stainless steel case, screw-in caseback, 8 mm crown, and premium gaskets provide individually tested 300M (30 ATM ≈ 1000ft) water resistance.
Timing is guaranteed by the VH31 quartz movement, paired with a Made-in-Italy TPU anti-shock system. The watch comes on a black two-piece quick-release nylon strap with sandblasted stainless steel hardware, fitting 22 mm lugs.
The caseback features UNIMATIC 360° X-ray engraving. Covered by a 24-month worldwide warranty, the Modello Uno Toolwatch UT1 is built for collectors, divers, and adventurers alike and comes in the UNIMATIC travel pouch.
*The Modello Uno UT1 has been tested to meet MIL-STD-810 standards, a U.S. military specification that ensures equipment is built and tested for real-world environmental challenges.
Movement
Quartz VH31A
Sweeping second hand
Accuracy ±15s/month
≈2y Power reserve
Case
Diameter 40mm / 41.5mm with the bezel
120 clicks mono-directional security bezel
Matte black countdown insert
316 stainless steel case sandblasted finish
Dial
Matte black with custom variable printed Arabic numerals
Super-LumiNova® C1
White open second rail and international orange dial trims
Durability & Protection
300m ≈ 1000ft ≈ 30atm WR Individually tested
2.5mm thick flat sapphire
Inner side anti-reflective coating
UNIMATIC 360° X-ray caseback
Design
Modello Uno case design with sandblasted finish
Individually numbered in yearly batches
Variable Font System high legibility numerals
What's included
Black nylon keeper two-piece quick-release strap
UNIMATIC travel pouch, warranty card with unique ID seal
FAQ Frequently Asked Questions
Are UNIMATIC watches truly professional diver tools?
Yes. Every diver is water resistant to 300m, individually pressure-tested, and built around a screw-down caseback and crown with a mono-directional safety bezel, fully rated for professional diving.
Why is every UNIMATIC watch individually numbered?
Each piece is produced in a strictly limited edition and numbered by hand on the caseback, guaranteeing its authenticity and its place within the series.
How durable are UNIMATIC watches for daily wear?
The 316L stainless steel case, double-domed sapphire crystal with anti-reflective coating and 360° protection system are engineered to take daily knocks in stride, from the desk to the water.
What kind of lume is used for low-light visibility?
Hands and indices are treated (unless stated) with Super-LumiNova® colours picked to match the design details, delivering a strong, long-lasting glow for clear legibility in low-light and underwater conditions. It is not radioactive and requires exposure to light (natural or artificial) to charge.
Are UNIMATIC watches water resistant?
All UNIMATIC cases are engineered to provide exceptional water resistance. Every UNIMATIC watch is individually tested to ensure a minimum water resistance of 300m (30 ATM), while selected on case modello 1 featuring our enhanced case construction are tested to withstand 600m (60 ATM).
Before exposing your watch to water, always make sure the crown and, where applicable, the pushers are fully screwed down and securely tightened. Never operate the crown or pushers while the watch is underwater.
After use in seawater, rinse the watch thoroughly with fresh water and dry it completely.Please refer to your specific model's technical specifications to confirm its certified water resistance rating.
What is a bezel used for?
Dive / Elapsed Time Bezel:
Marked from 0 to 60 minutes, this bezel rotates only counter-clockwise. Align the triangle (0 marker) with the current position of the minute hand to track the elapsed time at a glance.
Countdown Bezel: Marked in reverse, from 60 down to 0, this bezel is designed for timing a set interval. Rotate it so the desired number of minutes (for example, 15) lines up with the minute hand. When the minute hand reaches the 0 marker, the countdown is complete.
GMT Bezel: Featuring a 24-hour scale, the GMT bezel rotates in both directions and works together with your watch's GMT hand to display a second time zone. By adjusting the bezel, you can also track a third time zone.
Compass Bezel: Marked with the cardinal directions, the compass bezel can be used for basic navigation. Point the hour hand toward the sun, then use the bezel's directional markings to determine north and south.
Why do you call it the UNIMATIC Toolwatch?
The UNIMATIC Toolwatch collection is built around our proprietary 360° Protection System, engineered to maximize durability and reliability in demanding conditions; The collection features exclusively quartz-powered watches;
The system combines a TPU protective gasket positioned above the dial with a TPU movement holder. Together, these components absorb shocks and protect the movement and hands from impacts, helping the watch remain fully functional after drops, knocks, and vibrations.
To validate its performance, the entire protection system has been independently tested and certified to MIL-STD-810H, the U.S. military standard for evaluating the durability and ruggedness of technical equipment.
What they say about us
