SWISS MOVEMENT

SELLITA SW200-1

FAI

UNIMATIC SUPPORTS

200 pieces

WORLDWIDE

300m

WATER-RESISTANT

BRUSHED

FINISH

40mm

CASE DIAMETER

300m = 1000ft = 30atm WR

Diameter 40mm case with 41.5mm bezel

120 clicks mono-directional security bezel

2.5mm thick double domed sapphire

Anti-reflective coating on lens inner-side

FAI green aluminium minimal insert

316 stainless steel case brushed finish

Galvanic black dial

Hand-applied Super-LumiNova® C1 white

Galvanic screen negative silver closed second rail and trims

Automatic calibre Sellita SW200-1 28,800bph

Hacking seconds hand

Self-winding/ manual winding

Accuracy +/- 12 sec/day up to +/-30 sec/day

38h power reserve

Anti-magnetic ≥4800 A / m

Black two-piece calf leather strap

FAI green NATO strap with FAI orange nylon keeper

Stainless steel brushed hardware signed Unimatic

“Unimatic sostiene FAI“ screw-down caseback

Unimatic tough case, warranty card with unique ID seal

Download specs

Modello Uno ref. U1S-FAI is a Made in Italy slim diving watch made in support of FAI – Fondo per l’Ambiente Italiano (the National Trust for Italy).

It features a FAI green aluminium minimal diver insert with raised lume dot matching with hand-applied Super-LumiNova® C1 white on the galvanic black dive dial.

Time is displayed thanks to the matching phantom ladder hands set and the reverse lollipop second hand with Super-LumiNova® C1 white tip. The double domed anti-reflective sapphire crystal provides the best performance in every light condition.

The thin solid 316 brushed stainless steel case, the screwed-in 2 mm thick caseback, the 8 mm diameter crown together with the high quality gaskets set provide a water resistance tested individually to 30 atm=300m=1000ft. Timing accuracy is guaranteed by the automatic caliber Sellita SW200-1 movement tuned to 28,800bph with 38h power reserve and hacking second hand.

It comes on a black two-piece calf leather strap with stainless steel brushed hardware signed UNIMATIC and an extra FAI green NATO strap with FAI orange nylon keeper. The caseback features the “Unimatic sostiene FAI” engraving and the individual progressive number. The watch is covered by a 24-month worldwide warranty and is part of a unique edition of 200 pieces.

Suggested products